2 button switch plate with 1x10A relay. Designed for retrofitting and new builds where the power is 'wired to the switch.'
Can be used to trigger lighting and or other loads from this or any other bus connected input device.
The device is fully programmable and features multiple functions such as switching, dimming, blind/shutter control and or other functions. Any switchplate can control any device on the network.
Integrates with ABB's [email protected]
automation system via a bus cable.
- Dimensions (H × W × D): 44 mm x 44 mm x 40.9 mm
- Outputs: 1× normally open contact, potential free
- Suitable for: resistive
- Rated current: 10 A
- Rated power: 2300 W
- Suitable for: capacitive
- Rated current: 10 AX
- Protection class of device: IP 20
- Mounting depth: 31.5 mm