4 button switch plate with 2x4A blind shutter controllers. Designed for retrofitting and new builds where the power is 'wired to the switch.'
Can be used to trigger blinds and or other loads from this or any other bus connected input device.
The device is fully programmable and features multiple functions such as switching, dimming, blind/shutter control and or other functions. The switch plates are available in a variety of styles and colors sure to match any home.
Integrates with ABB's Free@Home automation system via a bus cable.
- Dimensions (H × W × D): 44 mm x 44 mm x 40.9 mm
- Outputs: 1× Change-over contacts/ normally open contact, potential bound
- Rated power: 920 VA
- Rated current: 2x4 A
- Suitable for: Operating mode blind
- Protection class of device: IP 20
- Mounting depth: 31.5 mm