The Split Unit Gateway forms the interface between the ABB-free@home system and airconditioning systems. The device converts the ABB-free@home telegrams into infrared commands and transmits them to the Split Unit. The Split Unit Gateway is installed in close proximity (maximum distance of 2 metres) to the Split Unit. The transmission unit of the enclosed cable is glued directly on the receiving unit of the Split Unit. The air-conditioning device can then be operated via any ABB-free@home device.
The following functions are provided:
- Switch-on / switch-off
- Specifying the set-point temperature including parameterizable set-point temperature limit
- Setting the operating Mode (Automatic, Heating, Cooling, Ventilation, Drying)
- Control of fan speed level
- Slat adjustment horizontal and vertical
- Activation of silent mode
| Weight | 1.0000 |
|---|---|
| Length | No |
| Height | No |
| Width | No |
| Part Number | SUG-F-1.1 |
Product Information Sheet
ABB Free@Home AC IR Gateway Compatibility List*
(Size: 230.6 KB)
ABB Free@Home AC IR Gateway Compatibility List
ABB Free@Home AC IR Gateway Manual*
(Size: 1.7 MB)
ABB Free@Home AC IR Gateway Manual
ABB Free@Home Product Manual*
(Size: 5.2 MB)
ABB Free@Home Product Manual
ABB Free@Home Webinar*
(Size: 6 MB)
ABB Free@Home Webinar
ABB KNX AC Gateway IR Install Guide*
(Size: 791.9 KB)
ABB KNX AC Gateway IR Install Guide
ABB KNX AC Gateway IR Product Manual*
(Size: 1.1 MB)
ABB KNX AC Gateway IR Product Manual
ABB KNX AC Gateway IR Slides*
(Size: 2.3 MB)
ABB KNX AC Gateway IR Slides
Write Your Own Review
We found other products you might like!
6.5kWh SolaX LG Chem Battery Upgrade
As low as $3,415.90
Related Products
Check items to add to the cart or
